Quantity : One (1) unit.
Type : Scrapper bar.
Capacity : 18 tons empty bunch per hour.
Liner speed : 16 meters per minute.
- Scrapper fabricated from angle bar 65 x 65 x 7 mm of 4 THK ms pl.
- Drag bar bolted on two (2) continuous chains 4” pitch roller type solid pin running on guides’ roller.
- Breaking strength of chain to be used is 24.000 lbf, Uk Chain, Precision or equivalent.
- Chain tension device would be provided at lower end of the conveyor.
- 5 mm thick mild steel trays of welded construction.
- Supported on 120 mm m.s channel and braced with 50 x 50 x 5 mm angle bar.
- A catwalk along the conveyor supported on m.s channel c/w 1” and 1¼” dia black steel pipe handrails.
- The inspection platform covered with 5 mm thick ms chequered plate
- A canopy would be provided for the entire length of the conveyor.
- Provided with suitable chute to right, middle and left section of the empty bunch hopper.
Drive unit : 7.5 kW/ 10 Hp Teco, Electrim electromotor and Brook Hansen gearbox or approved equivalent c/w sprocket and chain drive RS 80 Duplex 2
Dimension : Width = 760 mm, Length = ± 35.000 mm approx.