Nut Polishing Drum

Quantity          : One (1) unit.

Type                : Rotary, without roller sprocket.

Power              : 7.5 Kw/ 10 Hp Teco, Electrim electromotor and Brook Hansen or equivalen

Drive               : Chain duplex RS 160.

Speed              : 16 rpm

Capacity          : 6 tons nut/hour

Construction   :

  • Fabricated from 9 mm thick m.s plate.
  • Fitted of 8” dia. steam pipe schedule 80.
  • Fitted with internal buffle plate of 9 mm thick m.s plate and lifting bar mounted on a central shaft.
  •  Drum would be perforated with suitable sizes to drop the nuts into a pneumatic nut transport system.
  • Larger particles such as stones, bunch stalks would be overflow from end of the polishing drum.

Dimension       : Approximately 1.000 mm diameter and 5.000 mm in length.

Accessories     :

  • An m.s collecting tray for recovery broken kernels and small stone particles.
  • Nut cross conveyor dia. 300 mm c/w drive.

Nut Polishing Drum

Depericarper Vertical Column

Quantity          : One (1) unit.

Type                : Induced draught.

Capacity          : 36 tons FFB/hour.

Construction   :

  • Fabricated from 5 mm thick m.s plate.
  • Cross section of column would be rectangular and could be adjusted to vary areas for controlling air speed by means of a sliding back plate.
  • Fitted with toughened glass inspection window.
  • Structure from 100 x 100 x 10 mm m.s angle bar.

Dimension       : 800 mm x 800/1.000 mm cross section of column x 4.000

mm height approx.

Depericarper Vertical Column

Cake Breaker Conveyor

Quantity : One (1) unit.
Type : Semi scroll, unjacketed model screw.
Speed : Two (2) unit 70 and 80 rpm respectively.
Capacity : 36 tons FFB/hour, each.
Construction : The conveyor would be multi section, flanged joint to form a continuous length.
• Shell 8 mm thick m.s plate and side plate would be extended 400 mm high constructed with 6 mm thick m.s plate.
• Stiffener : 70 x 70 x 7 mm m.s angle bar welded to the edge.
• Wear plate : 6 mm thick m.s plate.
• Semi scroll : 9 mm thick m.s plate.
• Shaft : 3” dia. steam pipe schedule 80.
• Bearing : Used roller bearing self lubricating.
• End plate & Flange : 9 mm thick m.s plate.
• Final section : Consist of a worm screw fitting closely inside a split circular casing.
• A catwalk and maintenance platform would be provided along entire length of the cake breaker conveyor c/w ladder 1” and ¼” dia. black steel pipe handrail.
• Provided with ornamesh removable cover along its entire length.
• Unit drive : One (1) unit driven by 11 kW/ 15 Hp, 80 rpm geared motor. (prefer 15 kw u 80 rpm)
Make : Teco, Electrim electromotor and Brook Hansen gearbox or approved equivalent.
Dimension : Diameter; 800 mm x ± 22.000 mm.

Cake Breaker ConveyorCake Breaker Conveyor

Despatch Sheed

Quantity : One (1) unit.
Capacity : Two (2) units’ tankers’ at any time.
Construction :
” Steel structure column fabricated from IWF 200 x 100 mm.
” Provided with tie beam of IWF 150 x 75 mm.
” Span fabricated from 125 x 75 x 20 3.2 mm lips channel c/w dia. 12 mm sag
rods.
” Alu zine 0.5 mm thick used for roofing.
” Provided with operation platform, with 5 mm thick m.s chequered plate c/w 1″ x 1ᄐ” dia. Black steel pipe hand rail.
” Footing foundation of reinforced concrete mix K 225 c/w ground beam 20/30.
” Floor would be constructed with a 150 thick casted concrete reinforced with
two (2) layer of BRC M-6.
” Provided with two (2) no’s 6″ dia. discharge pipe c/w valve.
Dimension : 6.000 mm wide x 8.000 mm length floor area.

Despatch Sheed

Despatch Oil Pump

Quantity :Two (2) units’.
Type : Rotary vane, Positive displacement.
Capacity : 50 tons/hour
Total head : 20 m
Pump speed : 500 rpm
Casing : Cast iron.
Rotor : Stainless steel.
Shaft : Stainless steel.
Seal : Mechanical, ball bearing construction.
Vane : Self adjusting for wear sliding.
Unit drive : Driven by 7,5 kW/ 10 Hp electromotor Teco, Electrim or equivalent through pulley and v-belt.
Accessories :
• A remote control valve.
• A return line pipe c/w valves and fittings to the clarification station.
Make :
• Blackmer or equivalent
• Oil collected below screen 3 mm thick of m.s plate would be provided and
discharge oil to crude oil tank.

Despatch Oil Pump

Palm Oil Storage Tanks

2 units of palm oil storage tanks of mild steel welded construction will be constructed.
Capacity : 2 x 2,000 tons of CPO.
Dimension : Ø 17,466mm I/D x 10,062mm H.
Bottom plate : 10 mm m.s. plate.
Shell plate : 1st course 9mm. m.s. plate.
: 2nd course 9mm. m.s. plate.
: 3rd course 8mm. m.s. plate
: 4th course 8mm. m.s. plate
: 5th course 6mm. m.s. plate
: 6th course 6mm. m.s. plate
• Bottom slope to a center sump from which oil is pumped and bottom drained.
• One of tank fitted with external spiral access ladder.
• Provided with internal ladder.
• Interconnecting catwalk between tank of 600mm wide c/w dia. 1” and 1¼” black pipe hand rail would be provided.
• Provided with 500mm dia. Roof manhole with cover.
• Roof perimeter c/w handrail all round.
• One unit 600mm diameter side manhole at first stage.
• One unit 6” dia. Vent pipe at to of dome.
• On sounding pipe c/w float Stainless steel and external level indicator.
• Scale level will be including with Metrology certificate.
Roof plate : 5mm thick m.s. plate.
Accessories :
• Ø 2″ indirect steam heating coils + 8 blank flanges.
• Ø 3″ palm oil inlet valve & Ø 4″ outlet valve (body cast steel, shaft
• and seat stainless steel).
• Steam valve and steam trap FT ball float type Spirax Sarco for
• heating coils + thermostatic control.
• Level indicator.
• Drain pipe Ø 2.5″
• Thermometer 150mm dia.
• Recycling pipe to clarification, with sight glass.

Storage Tank

Clarification Structure

Quantity : One (1)
Function :Suitable to support the entire clarification tank and vacuum drier.
Construction :
Main structure of IWF 200x100x21.33 kg/m mild steel H beam column. Supported with 200 mm, 150 mm m.s channel Braced with 75x75x6 mm mild steel handle bar Fitted with maintenance platform and covered with 5 mm thick mild steel chequered plate c/w dia. 1” and ¼” black steel handrail. Provided with
access ladders and interconnected walkways. One (1) runway beam c/w three (3) tons chain block would be fitted above sludge separator center line.

Clarification Structure

Final Effluent Pump

Quantity : Two (2) units’.
Type : Centrifugal, Wear resistant.
Capacity : 40 m³/hour.
Total head : 30 m
Construction :
• Casing : Stainless steel
• Shaft : Stainless steel
• Impeller : Stainless steel
• Seal : Mechanical
Unit drive : 11 kW/ 15 Hp Teco, Electrim electromotor through pulley and v-belts.
Accessories :
• Discharge pipe to cooling tower 4” dia. Steam pipe sch. 80.
• A selector control switch Non return valve.
Make : Roto Pump, Kew Pump or equivalent
Size : 4” / 3”
Power : 15 Hp

Final Effluent Pump

Sludge Pit

1 (one) unit Fat Pit, 3 compartment (1 for suction pump ; 1 for sludge and 1 for condensate sterilizer) below ground level, will be provided and installed to receive sludge centrifuges and condensate sterilizer.
Pump will be self priming with tank and lay on ground position.
Type : Rectangular 3 (three) compartment under ground
Construction : Concrete.
• 1 compartment for pump 1.5m x 6.6m to install roofing 2m height.
• Provided round pit 40mm dia. black pipe hand rail.
Capacity : 60 m³
Dimension : 6.6m x 6.1m x 1.5m.
Accessories : A float switches control. Shelter with spandex 0.5 mm.

Sludge Pit

Sludge Drain Pump

Quantity : Two (2) units’, one (1) unit as standby.
Type : Centrifugal.
Make : Kew or equivalent.
Capacity : 30 m³/hour
Total head : 30 m
Construction :
Casing Stainless steel, Shaft Stainless steel, Impeller Stainless steel, Seal Mechanical, Unit drive 4 kW/ 5.5 Hp Teco, Electrim electromotor through pulley
and V-belts,
Accessories A selector control switch & Non return valve.

Sludge Drain Pump