Claybath Separation System

The system (in one set) consist of :

1) Mixer and Clay Solution Tank

Quantity          : One (1) unit

Construction   :

  • The tank divided with two (2) section and both of the tank section have a slope bottom
  • Fabricated from 6 mm thick mild steel plate of all welded construction and the top end stiffened with at 100 mm mild steel channel.
  • Base frame of the tank fabricated from 120 mm channel.
  • Provided with 100 mm dia.draining cleaning pipe c/w valve at the bottom of tank for each section.
  • One (1) section of the tank facilities for mixing the clays with water to have suitable solution, and the other one tank for holding of the clays solution.
  • Provided with 2,2 kW/ 3 Hp Teco, Electrim flange mounted type & vertical electromotor c/w Brook Hansen gearbox for stirrer 200 rpm to mix the clay solution.

Dimension       : 1,320 mm x 3,700 mm x 960 mm height.

2) Conical Separation Tank

Quantity          : One (1) unit

Construction   :

  • The tank would be a conical shape and
  • fabricated from 6 mm thick mild steel plate of all welded construction, and at the top end stiffened with 40 x 40 x 4 mm angle bar.
  • Provided with buffle plate
  • The separator tank constructed above the mixer and clay solution tank which supported by 4 nos 100 mm mild steel channel.
  • At the bottom of cone shape fitted with a 100 mm dia.black steel pipe for discharge of shell to the vibrating screen.
  • Dimension of the tank would be 1,600 mm diameter, 200 mm height for cylindrical shape and 750 mm height for cone shape.

3) Pump

Quantity          : One (1) unit

Type                : Centrifugal— Non clogging type

Capacity          : 30 cu.m per hour

Total head       : 20 m

Pump speed     : 1,200—1,400 rpm

Make               : Kew Pump or approved equivalen.

Construction   :

  • Casing : Stainless Steel
  • Impeller : Stainless Steel

Shaft               : Stainless Steel

Unit drive        : 5,5 kW/ 7.5 Hp Teco, Electrim electromotor through pulley and v-belt.

4) Discharge Pipe Pump

Quantity          : One (1) unit

Function          : To reduce the velocity of flow rate

Construction   :

  • Fabricated from 5 mm thick mild steel plate of all welded construction
  • Flange in connection.

5) Vibrating Screen

Quantity          : One (1) unit

Type                : Single deck

Construction   :

  • Fabricated from mild steel plate and channel
  • Walls fabricated from 5 mm thick mild steel plate
  • The screen area 1.7 square meters of 8 mesh . stainless steel
  • Screens held in by mild steel frame fitted with tension device.
  • Suspended on coil spring located on each edge and dampers preventing to the supporting frame.
  • Amplitude of vibration adjustable by means one external eccentric weight.
  • Fitted with two (2) chutes each for kernels and shells.
  • Provided with water pipe spray for cleaning kernels and shells.

Dimensi           : 1,000 mm width x 2,000 mm length approx.

Drive unit        : 2.2 kW/ 3 Hp Teco, Electrim electromotor, 1,500 rpm through rubber coupling.

Claybath

Satu Tanggapan

  1. Dengan hormat,
    BISMACINDO, bergerak di Pemasangan & Pengadaan Penangkal Petir Elektrostatis (External Protection – Kurn, Erico, Stormaster)
    Sole agent arrester, grounding, cadweld, spark gap, cathodic.
    Supplier Kabel Elektrikal : Nyy, Nya, Conveyer
    Terimakasih atas perhatian & kerjasamanya.
    ZULKARNAEIN Mb-081584114769 Fax-021 74645309
    zoelkarnaeinjoel@yahoo.com

Tinggalkan Balasan

Isikan data di bawah atau klik salah satu ikon untuk log in:

Logo WordPress.com

You are commenting using your WordPress.com account. Logout / Ubah )

Gambar Twitter

You are commenting using your Twitter account. Logout / Ubah )

Foto Facebook

You are commenting using your Facebook account. Logout / Ubah )

Foto Google+

You are commenting using your Google+ account. Logout / Ubah )

Connecting to %s

%d blogger menyukai ini: