Type : Single chain with 1.5kW/2Hp Teco, Electrim electromotor and Brook Hansen gearbox or equivalent through sprocket and chain drive.
Capacity : 6 tons kernel/hours.
Bottom and boot sections fabricated from 6 mm thick m.s plate, reinforced with 50 x 50 x 5 mm m.s angle bar and fitted with 4 mm thick liner plate.
Intermediate section fabricated 5 mm thick m.s plate reinforced with 50 x 50 x 5
mm m.s angle bar. Front body consists of removable panel for easy maintenance. Bucket fabricated from 5 mm thick m.s plate with bolt high
Tensile c/w spring washer and double nut.
Take up bearing would be fitted at the lower end of the elevator. As the adjustable bearing c/w adjusting screws and guides. At the top shaft would be fitted flange bearing.