Pneumatic Wet Nut Transport System

Quantity          : One (1) set

Type                : Induced.

Capacity          : 6 tons of nuts/hour.

The pneumatic wet nut transport system consists of :

a) Vertical Column (Destoner)

Quantity          : One (1) unit.

Type                : Vertical circular.

Capacity          : 6 tons of nuts/hour.

Construction   :

  • Fabricated from 10” dia black steel pipe.
  • Top section connection to circular section of ducting.
  • At the lower end provision for air regulation by sliding gate to varycross section of column.

Dimension       : Diameter 10” of suitable length.

b) Fan

Quantity          : One (1) unit.

Type                : Suction.

Make               : PHOENIX,NOVENCO or equivalent.

Capacity          : 12.000 cu. m/hour.

Static pressure : 500 mm w.g

Speed              : 2.200 rpm

Unit drive        : 22 kW/ 30 Hp electromotor Teco, Electrim or equivalent through pulley and V-belts.

c) Ducting

Quantity          : One (1) lot

Capacity          : 6 tons of nuts/hour.

Construction   :

  • Fabricated from black steel pipe.
  • Provided with flange connection to form a continuous length.

d) Cyclone

Quantity          : One (1) unit.

Type                : Induced.

Capacity          : 6 tons nuts/hour.

Construction   :

  • Fabricated from 5 mm thick m.s plate
  • Outlet of apex bottom fitted with an air-lock.
  • Top section of vortex finder connected to a whirling chamber fabricated from 4 mm thick m.s plate.
  • The outlet ducting of fan provided with suitable flap valve to control the pneumatic balance.

Dimension       : 1.200 mm diameter.

e) Nut Cyclone Airlock

Quantity          : One (1) unit.

Type                : Rotary.

Capacity          : 6 tons of nuts/hour.

Construction   :

  • Fabricated from m.s plate.
  • Six segment, m.s plate welded on to a rotor shaft.
  • Rotor shaft bearing of flange type, fitted to end plates.
  • Suitable flanges at inlet and outlet for easy connection.

Dimension       : 300 mm diameter.

Drive               :Drive would be by 1,5 kW/ 2 Hp Teco, Electrim electromotor c/w Brook Hansen gearbox or approved equivalent.

Destoner Fan

Tinggalkan Balasan

Isikan data di bawah atau klik salah satu ikon untuk log in:

Logo WordPress.com

You are commenting using your WordPress.com account. Logout / Ubah )

Gambar Twitter

You are commenting using your Twitter account. Logout / Ubah )

Foto Facebook

You are commenting using your Facebook account. Logout / Ubah )

Foto Google+

You are commenting using your Google+ account. Logout / Ubah )

Connecting to %s

%d blogger menyukai ini: