Interconnecting Pipe Works

  • One (1) lot interconnecting pipe work, valves and fittings between the raw water inlet to the final user point in the factory office, workshop and auxiliary building would be supplied and installed.
  • All piping would be of suitable of galvanized iron pipe c/w valves and fittings.
  • Valves used butterfly valve class 150 psi and gate valve class 150.
Interconnecting Pipe Work

Interconnecting Pipe Work

Over Head Water Tank

Quantity          : Three (3) units’.

Over Head Water Tank

Over Head Water Tank

Type                : Overhead with cylindrical section tank.

Capacity          : 60 m³ (2 unit) + 40 m³ (1 unit)

Construction   :

  • The shells of tank fabricated from 6 mm thick mild steel plate of all welded construction and suitable stiffened.
  • Bottom plate fabricated from 6 mm thick m.s plate of welded construction.
  • Roof fabricated from 4 mm thick mild steel plate c/w angle bar support.
  • Provided with roof manhole.
  • One (1) set 15 metres height of steel structure of IWF 250 x 125 mm c/w m.s channel and 75 x 75 x 7 mm m.s steel angle bracing to support the tank and maintenance/operating platform.
  • The platform would be suitable size of rectangular type covered with 5 mm thick m.s chequered plate c/w dia. 1” and 1¼” black steel pipe hand rail.
  • Provided with external ladder.
  • Provided with air vent pipe.
  • Fitted with inlet and outlet pipe for each tank.
  • Fitted with overflow and drain pipe.
  • Structure 12 m height.

Accessories     :

  • All tanks to be sand blasted and treated internally Epoxy-paint.
  • A low level alarm and to control the operation of booster pump.
  • An inline flow meter for processing tank & suitable level indicator.
  • All tanks to be sand blasted and treated internally Epoxy-paint.

WTP Pumps House

Quantity          : One (1) unit

WTP Pump House

WTP Pump House

Function          : To house four (4) units sand filter pump, domestic pump, chemical pump, fire fighting pump and solution tank c/w panel.

Construction   :

  • The structure column 150 x 150 mm fabricated from reinforced concrete K-175.
  • Provided with reinforced concrete sloof 150 x 200 mm.
  • The walls height constructed from 114 mm thick brick and rendered on both side.
  • At the end of the wall provided with 150 mm x 150 mm reinforced concrete main balk.
  • The pump provided with a suitable panel door & necessary windows.
  • The roof 0,5 mm thick alum zinc c/w frame from hard wood. Floor of the pump house constructed from 100 mm thick reinforced concrete with mosaic or ceramic tiles.
  • Suitable drainage of concrete mix. 1 : 3 : 5 would be provided within and around the pump house.

Dimension : 12,000 mm x 6,000 mm x 3000 mm

Domestic Pumps

Quantity          : One (1) unit

Domestic Pump

Domestic Pump

Capacity          : 30 m³/hour, each.

Type                : Centrifugal.

Total head       : 40 m

Pump speed     : 2.900 rpm

Make               : Allen Gwynnes

Construction   :

  • Shaft : Stainless steel.
  • Body casing : Cast Iron.
  • Impeller : Stainless steel.
  • Seal : Mechanical

Unit drive        : Direct coupled 11 kW/ 15 Hp Teco, Electrim electromotor on common base plate.

Accessories     : Pressure gauge.

Solution Tank For Chlorination

Quantity          : One (1) units’.

Carbon Active

Carbon Active

Capacity          : 200 liters,

Type                : Cylindrical section.

Construction   :

  • Fabricated from fiberglass
  • Fitted with cover
  • Provided with stainless steel mixer
  • Themixer driven by 1/4 Hp electromotor. Dia. 1.500 x 1.500 mm height Level switch control.

Pressure Sand Filter

Quantity          : Two (2) units’.

Pressure Sand Filter

Pressure Sand Filter

Type                : Vertical.

Capacity          : 90 m³/hour, each.

Test pressure   : 6 kg/cm².

Operating press : 3.5 kg/cm².

Construction   :

  • Fabricated from 8 mm thick m.s plate of all welded construction.
  • Fitted with top inlet distributor and bottom collector.
  • Provided with 4” nozzle inlet and outlet.
  • Fitted with one top manhole of dia 500 mm.

Fitted would be of sand as below :

  • 6 mm to 12 mm – 30 cm depth.
  • 1mm to 1.5 mm – 30 cm depth.
  • Less than 1 mm – 15 cm depth.
  • Fitted air release valve.
  • Provided with all pipes system valves and fitting.
  • Provided with sampling cock.
  • Dimension : Dia. 2.100 mm x 2.400 mm

Sand Filter Booster Pumps

Quantity          : Two (2) units’, One (1) unit as standby.

Sand Filter Booster Pump

Sand Filter Booster Pump

Capacity          : 80 m³/hour, each.

Type                : Centrifugal.

Total head       : 40 m

Pump speed     : 2.900 rpm

Make               : Allen Gwynnes Nimbuzz Pump

Construction   :

  •  Shaft : Stainless steel.
  • Body casing : Cast Iron.
  • Impeller : Stainless steel.
  • Seal : Mechanical

Unit drive        : Direct coupled 30 kW/ 40 Hp Teco, Electrim electro motor on common base plate.

Accessories     : Pressure gauge.