Solution Tank

Quantity          : Three (3) units’.

Solution Tank

Solution Tank

Capacity          : 200 liters, each.

Type                : Cylindrical section.

Construction   :

  • Fabricated from fiberglass
  • Fitted with cover
  • Provided with stainless steel mixer
  • Themixer driven by 1/4 Hp electromotor. Dia. 1.500 x 1.500 mm height Level switch control.

Chemical Feed Pump

Quantity          : Three (3) units’.

Type                : Positive double diaphragm.

Capacity          : 1.600 liter per each day.

Pressure           : 5 kg/cm²

Stroke/minute  : 105 rpm.

Drive unit        : ¼ kW/ 0,3 Hp through pulley and V-belt.

Make               : Pulsafeeder Pump and Weatern electromotor or approved equivalen.

Accessories     : ¼ kW/ 0,3 Hp dia. discharge/suction of PVC height pressure tubing c/w foot valve, Strainers, sinkers and fittings.

Water Basin Concrete

1 (one) unit Water Basin will be supplied and installed to received water from Raw Water Clarifier Tank and discharged to sand pressure filter via booster pump.

Capacity          : 450m3.

Construction   : Concrete

Complete with            : Drain pipe, discharged pipe and ladder.

Water Basin

Water Basin

Water Clarifier Tank

Quantity          : One (1) units’.

Water Clarifier Tank

Water Clarifier Tank

Type                : Vertical flow sludge blanket type, recyclable sludge.

Capacity          : 250 m³ approx.

Construction   :

  • Drain pipes.
  • Discharge pipe.
  • Recycling pipe.
  • Flow meter George Kent or equivalent.
  • Access spiral ladder, operating platform and hand rails + walkways.
  • Valves for sampling water and sludge.
  • Fitted with inlet, overflow, drainage and outlet pipe c/w valve.

Raw Water Pump Set

Quantity          : Four (4) units’.

Raw Water Pumps Set

Raw Water Pumps Set

Capacity          : 120 m³/hour, each.

Type                : Centrifugal.

Total head       : 40 m

Pump speed     : 2.900 rpm

Make               : Allen Gwynnes or approve equipment.

Construction   :

  • Shaft : Stainless steel.
  • Body casing : Cast Iron.
  • Impeller : Stainless steel.
  • Seal : Mechanical.
  • Unit drive : Direct coupled 37 kW/ 50 Hp Teco, Electrim electro motor on common base plate.

Accessories     :

  • The pump would be operated manual and automatically.
  • Pressure gauge.

Function          :

  • Two (2) units for pumped water from river to water reservoir.
  • Two (2) units for pumped water from water reservoir to factory.

Water Intake Pumps House

Quantity          : One (1) unit

Water Intake Pump House

Water Intake Pump House

Function          : To house two (2) units Raw Water Pumpset c/w panel.

Construction   :

  • The structure column 150 x 150 mm fabricated from reinforced concrete K-175.
  • Provided with reinforced concrete sloof 150 x 200 mm.
  • The walls height constructed from 114 mm thick brick and rendered on both side.
  • At the end of the wall provided with 150 mm x 150 mm reinforced concrete main balk.
  • The pump provided with a suitable panel door & necessary windows.
  • The roof 0,5 mm thick alum zinc c/w frame from hard wood. Floor of the pump house constructed from 100 mm thick reinforced concrete with mosaic or ceramic tiles.
  • Suitable drainage of concrete mix. 1 : 3 : 5 would be provided within and around the pump house.

Dimension       : 4,000 mm x 4,000 mm x 3000 mm approx. to be suit on site.

Water Treatment Plant

The raw water would be taken from the river at nearest from the mill site.

The quality of the water product is suitable for process water, domestic supply and for general supply.

 

TRANSFER POND 

Transfer Pond

Transfer Pond

Quantity          : One (1) length of channel

Type                : EarthWork

Capacity          : 2000 m3

Construction   :

  • For Connecting the river to reservoir.
  • Excavated from the ground to form a trapezium pond.
  • The base of channel would be constructed 1,500mmminimumbelow river base.

Dimension       : 10,000mm wide x 50,000mm length approx. to be suit on site.

 

RAW WATER PUMPS HOUSE

Raw Water Pump House

Raw Water Pump House

Quantity          : One (1) set.

Type                : Raw water intake pump house or Ms. Pontoon.

Construction   :

  • Pontoon fabricated from 5 mm thick ms. Plate off all construction.
  • Provided with two (2) 10” dia. schedule 80 steam pipe piling for guided of Pontoon on water level.
  • Fitted with suitable retaining pipe 5” dia. schedule 80 c/w bracing 3” dia. Black steel pipe.
  • Provided with access platform covered with chequered plate 5 mm thick.

WATER RESERVOIR

Quantity          : One (1) lengths of channel

Water Reservoir

Water Reservoir

Capacity          : 300,000m3 approx. in total

Type                : Earth ponds

Construction   :

  • Excavated from the ground to form a trapezium pond.
  • Working depth of the pond would be 8,000mmand 2,000mmof free board.
  • The total depth of the pond 10,000 mm.

Dimension       : Suit be drawing.